Welcome to World Floor Expo!

Metroflor Gloss Finish

Metroflor strippable gloss finish is a metal cross-linked floor finish which dries to a high gloss and provides a tough mar-resistant film for periodic use on all vinyl flooring. Good for all vinyl installations. Spread rate is 400 sf/quart (one coat). New installations require two coats.

Specially formulated to add to the appearance and life of the floor, MF Gloss Finish is a long lasting strippable finish which will protect against heavy traffic and scuffing. It is a metal cross-linked floor finish which dries to a high gloss and provides a tough mar-resistant film for periodic use on vinyl floors. The metallic-acrylic polymers used produce the ultimate in floor finish durability. Use whenever additional gloss, wear, protection and moisture resistance is desired.

Preparation:


Thoroughly clean the floor. Remove all old finish using Metroflor Stripper. Pay particular attention to corners and baseboards to ensure that all old coatings have been removed. Scrub, rinse well with clear water and allow to dry.

Application:


Apply the finish in 2 light coats (on new floors) using a sponge mop, wax applicator or a damp, clean cloth. Put a small amount of finish in a shallow pan, dip mop and spread a thin, even coat. Do not leave any puddles. Allow to fully dry (tack free) for at least 45 minutes before applying second coat. Apply future coats as needed.

Note: Either Metroflor Gloss or Matte Finish is required in commercial settings. Metroflor Finishes are recommended in residential installations experiencing heavy use.

2 Item(s)

per page

Grid  List 

Set Descending Direction

2 Item(s)

per page

Grid  List 

Set Descending Direction